1, decoration style to determine the color and style.

2, color matching.

After deciding to decorate a style and decorate tonal, want to consider the color of wooden door real namely, want to be coordinated with bedroom environment and colour, maintain the color such as soft adornment of real wood door cover and metope, ground, furniture and dark degree are consistent.

3, wood plastic door feel.

After considering in the aspect of style color comprehensively, the next is the process and quality of the product, through the simple appearance inspection method to assess the quality of solid wood door set process. The use of hand stroking solid wood door set edge, board, Angle, no scratch feeling, soft and delicate, conditional with the aid of tools to measure the solid wood door set edge straight.

Wood plastic door cover installation steps

1. Check the specifications, opening direction and related accessories of the door according to the design drawings. Use a tape measure to measure the height and width of the door. The height and width of the bathroom door is 200cm×80cm; The width of the bathroom door is 200cm×70cm. Correct in time if the dimensions are inconsistent.

2, measure the position line, determine the position of the door frame, pull out the vertical line with the ink fountain, two vertical lines on one side of the door. Drill holes on the vertical line with a hammer drill. The distance between the holes and the holes is about 30cm, and there are 10 holes in two rows of a side door. The drill bit for this impact drill should be 12 mm and the depth of the drill should be about 6 cm.

3. Hammer the small wooden wedges into the holes one by one to fix the door frame plate. The volume of the small wood wedge is 5cm×1.5cm×1.5cm×1.5cm, which is made of larch. The wood is compact and not easy to loosen.

4. Open material to make door frame. The size of woodworking board for the left, right and right door frame keel is 200cm×3cm×8cm, and the size of woodworking board for the top door frame keel is 80cm×3cm×8cm. The high density nine centiboard is glued to the keel and then steam secured. Connect the three door frames according to the shape of the door and fix them at the joint with big nails.