If it is the traditional way - the scene of wood plastic door cover, is fixed by the scene decoration workers directly with nails in the door wall; And if it is the door set installation of complete door products (now more and more users are using complete door products), we should consider two problems:

One is the corresponding complete set of door products, whether the technical structure of the door cover is consistent with the three technical characteristics of firmness, accuracy and stability required by the complete set of door products;

Second, complete sets of door installers for the installation site of the survey and the standardization of the installation process (such as the use of foaming agent and other ways for the door fastness, accuracy and stability of future use of all possible impact).

1. Check the specifications, opening direction and related accessories of the door according to the design drawings.

2, measure the height and width of the door with a tape measure. The standard height and width of the door is 200cm×80cm; The height and width of the door of the toilet is 200cm×70cm, and the size should be corrected in time if there is any discrepancy.

3, measure the position line, determine the position of the door frame, pull out the vertical line with the ink bucket bomb, two vertical lines on one side of the door.

4, in the vertical line with percussion drilling, the distance between the holes and holes is about 30cm, a side door two rows of a total of 10 holes. The drill bit for impact drilling should be 12mm and the hole depth is about 6cm.

5. Hammer the small wooden wedge into the hole one by one to fix the door frame board. The volume size of small wooden wedge is 5cm×1.5cm×1.5cm, and it is better to make larch, because the wood structure of larch is tight and not easy to loosen.